USER MANUAL — ME03 EARPHONES 1
SOUND TOOLS FOR CREATIVE MINDS Our obsession is the interaction between sound and creativity. Our passion is building beautifully designed, technically sophisticated sound tools for creative minds. Our earphones are designed to deliver our signature sound with a refined appearance and thoughtful details, all in a compact format.
DESIGNED FOR DAILY USE Our earphones are built from machined anodized aluminum and utilize heavy-duty cables. We use custom 8mm neodymium drivers and oxygen-free copper cables to deliver rich, warm sound. Our tuning is designed to accommodate a diversity of tastes and musical genres. We separated the microphone from the remote for increased vocal clarity and reduced noise, removing the need to hold the remote while you speak on the phone.
SPECS MIC AND REMOTE DIMENSIONS XXXXXXXXXXXX 23mm x 10mm Serial Number WEIGHT 25g The microphone is separated from the remote and placed closer to your mouth for increased vocal clarity and reduced noise.
GETTING STARTED XS S M L Choose an ear tip size included with the package that best fits your ears. This helps ensure a comfortable fit and seal to achieve optimal sound quality. Gently insert the earphone into your ear for a good seal. Earphones are marked left (L) and right (R). Be sure to insert accordingly. When removing the earphone from your ear, pull on the earphone. Never pull on the cable. Attach the ear tip you have chosen to the earphone nozzle.
TROUBLESHOOTING No Sound: • Check to make sure the earphone plug is fitted completely into the audio source. • If ear tips detach, check diagram on how to firmly attach ear tips to earphone nozzle. • If there is low sound quality, check for blockage in nozzle by removing ear tips, do not clean with sharp objects. Earphone Plug • Check source device to make sure sound is coming out. • If there is weak bass, check ear tip seal or try a different ear tip size.
MAINTENANCE • When disconnecting the earphones from the audio source, avoid pulling on the cable. Hold the plug at the end of the cable and pull to disconnect. • Store in a clean, dry environment, preferably in a box or canvas case. • To avoid damage, do not store other items in the canvas case along with your earphones. • Do not drop, sit on, or allow the earphones to be exposed to water, moisture, or temperature extremes.
HEARING HEALTH AND FITNESS Our ability to hear is amazing. Treat your ears like the precious tools they are, and they will continue to provide you with exceptional data, as well as a lifetime of incredible sonic experiences. In general, do not listen “too loud or for too long,” and be attentive to your own ears. Ringing, discomfort, or sensitivity to high frequencies and treble may be a signal from your ears that you are pushing them to their limits and causing damage.
PREVENTION OF NIHL (NOISE INDUCED HEARING LOSS) NIHL is a preventable condition caused by both one-time and extended exposure to excessive decibel (dB) levels. This harm to sensitive inner ear structures is irreversible and people of all ages can be affected. Damage can happen in a single event or gradually over time. One-time exposure to sounds louder than 110 decibels and extended exposure to sounds over 85 decibels can cause harm.
WARRANTY AND CUSTOMER SERVICE Master & Dynamic guarantees this product against defects in materials or workmanship for a period of two years from the date of original purchase from an authorized Master & Dynamic retailer or reseller. Master & Dynamic will either repair or replace the defective product at our discretion if the product is returned within the warranty period.
ME03-M-051614 The remote and mic are supported only by iPhone 3GS or later, iPad, iPod touch (2nd generation or later), iPod classic (120GB, 160GB), and iPod nano (4th generation or later). The remote is supported by iPod shuffle (3rd generation or later). Audio is supported by all iPad and iPod models. Designed and Developed by New Audio LLC New York, NY 10001. Made in China.