Installation Guide

PT6 Wiring Diagram
From Power Source:
1. White connects to the white wire from the motor.
2. Black connects to the black lead on the t-stat.
3. Green connects to the green ground screw on the PT6 casing.
From Fan Motor:
4. Black (w/ White Stripe) goes to the remaining black lead on the t-stat.
(Ensure connections are as shown)
NOTE: Follow all Electrical Codes when installing. Remove power from the circuit before connecting wires.
295 Mckoy Rd, Burgaw, NC 28425 I 800-211-9612 I gaf.com/masterflow