Operator`s manual

Page 21
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The blade
does not follow
a straight line:
Teeth are dull. This is
caused by hitting a hard
object such as a nail,
dulling teeth on one side.
The blade tends to cut to
the side with the sharpest
teeth.
Change a new blade
Base is out of line or bent.
Repair the tool by a qualified authorized
Service Center
Blade is bent. Change a new blade
The blade
binds or
smokes from
friction:
.Blade is dull. Sharpen or Change a new blade
Blade is on backwards Reassemble the blade correctly
Blade is bent. Change a new blade
Incorrect blade is being
used.
Use a suitable blade
Workpiece is not properly
supported.
Clamp the workpiece firmly