Operator`s manual

Page 8
ASSEMBLY
CONTENTS
Impact wrench, 2 screwdriver bits, 1/2" to
3/8" socket reducer, 1/4" hex adaptor and
instruction manual
UNPACKING
1. This product has been shipped completely
assembled.
2. Carefully remove the tool and any
accessories from the box. Make sure
that all items listed in the contents are
included.
3. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
4. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
OPERATION
TO ATTACH BATTERY
PACK (FIG. 2)
FIG. 2
ATTACH
DETACH
1. Lock the trigger switch on the impact
wrench by placing the direction of
rotation (forward/center-lock/reverse)
selector in center position.
2. Align the raised rib on the battery pack
with the grooves of the wrench, and then
attach the battery pack to the wrench.
NOTICE: When placing the battery pack on
the tool, be sure that the raised rib on the
battery pack aligns with the groove inside
the wrench and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
TO DETACH BATTERY
PACK (FIG. 2)
1. Lock the trigger switch on the impact
wrench by placing the direction of
rotation (forward/center lock/reverse)
selector in the center position.
2. Depress the battery release buttons
located on the front of the battery pack
to release the battery pack.
3. Pull the battery pack out and remove it
from the tool.
WARNING:
Battery tools are
always in operating condition. Therefore,
the direction-of-rotation selector should
always be locked when not in use or
carrying at your side.