Worklight PUSH 241-0423 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374. (M-F 8am – 6pm EST.
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING: When using electric appliances, basic precautions should always be followed, including the following: Read all of the instructions before using the appliance. 1. To reduce the risk of injury, close supervision is necessary when an appliance is used near children. 2. Only use attachments recommended or sold by the manufacturer. 3. Do not use outdoors. 4.
SAFETY INSTRUCTIONS Handle the tool with care around any flammable surface. • Do not use or permit use of the tool in bed or sleeping bags. This tool lens can melt fabric and a burn injury could result. 3. Do not let gasoline, oils, petroleumbased products, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic. 4. DO NOT stare directly at the light or project the light directly into the eyes of others near by. 5.
OVERVIEW FIG. 1 Head Adjustable focus loop Reflector Switch Bulb Handle PUSH Pivot-release button SPECIFICATIONS Illumination source Incandescent lamp Bulb Type Single contact base (PX13.5s) Bulb power 18/20V DC 300mA Pivoting head 90 degrees Pivoting handle 130 degrees Worklight weight (without battery) 10 oz.
ASSEMBLY WARNING: If any part is broken or missing, DO NOT attempt to attach the battery or operate the worklight until the broken or missing part is replaced. Failure to do so could result in possibly serious injury. WARNING: Do not attempt to modify this worklight or create accessories not recommended for use with this worklight. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION TO ATTACH BATTERY PACK (FIG. 2) FIG. 2 ADJUSTING THE WORKLIGHT HANDLE AND HEAD (FIGS. 3-4) FIG. 3 PUSH Handle adjusts 130° PUSH 1. 2. Align the raised portion on the battery pack with the grooves on the bottom of the worklight, and then attach the battery pack to the worklight as shown. Make sure that the latch on the battery pack snaps into place and the battery pack is secured to the worklight before beginning operation. TO DETACH BATTERY PACK (FIG. 2) 1. 2.
MAINTENANCE GENERAL MAINTENANCE BULB REPLACEMENT (FIG. 5) The tool may be cleaned most effectively with compressed, dry air. Always wear safety goggles when cleaning tools with compressed air. FIG. 5 Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WORKLIGHT WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2014 Menard, Inc.