Instruction manual

13
Lowes.com/masterforge
CONVERSION INSTRUCTIONS
Rear Burner Conversion
1. Remove the 5 screws (3/16-24 x 1/2 in.) at
the back of burner box to detach the rear
burner cover from the rear panel of burner
box.
During this process, hold the rear
burner cover, otherwise, it will drop and
may break, possibly causing injury.
(Fig. 31)
2. Use a wrench to remove rear burner orice
(1.03) from the rear burner and the hose.
(Fig. 32)
3. Replace it with the NG orice, and then
tighten.
Make sure you are using the correct
orice, marked “1.4”. (Fig. 33)
rear burner cover
31
32
hose
1.03
rear burner
33
rear burner
1.4