Instruction manual

17
Lowes.com/masterforge
CONVERSION INSTRUCTIONS
2. Change to NG orice
Remove the LP orices rst with the orice
removal tool (B). Install the NG orice
according to the table below. (Fig. 41)
NG Orice for Item #0314076
Main Burner Φ1.37 mm 3 PCS
Sear Burner Φ1.46 mm 1 PC
Side Burner Φ1.32 mm 1 PC
3. Re-install the burners
Make sure the orices are aligned with the
burners and the ignition pins are installed
in their original positions. Check the sparks
before operating the grill. (Fig. 42)
4. Reassemble remaining parts
After making all of the conversions, put
ame tamers back in the burner box,
followed by the grids and warming racks.
(Fig. 43)
5. Change to 10-ft. NG hose
Take the regulator off the manifold and
replace it with 10-ft. natural gas hose (A).
Please make sure the hose is securely
fastened. (Fig. 44)
6. To complete conversion, re-install all knobs.
41
B
42
43
44