Instruction manual

18
Lowes.com/masterforge
CONVERSION INSTRUCTIONS
Conversion Instructions for Item #0221885
1. Take the burners out and adjust the air
shutter.
a. Main burner conversion
Pull off the R-pins and take the main
burners out. Adjust main burners’ air
shutters by loosening the air shutter
screws.
The settings are:
1/4 in. open for LP gas.
1/16 in. - 1/8 in. open for NG gas.
You need to adjust the openings before you
put the burners back in the burner box.
(Fig. 45)
2. Side burner conversion
a. Open the lid and remove the grid. (Fig. 46)
b. Loosen the two screws shown in Fig. 47.
21
45
R-pin
bracket
main burner
46
47
Screws