Instruction manual
20
Lowes.com/masterforge
CONVERSION INSTRUCTIONS
4. Adjust the main burner air shutter to have
a 1/16 in. -1/8 in. opening. Install the main
burner back to the rebox and secure to
the bracket with the R-pins.
Make sure the orices are aligned with the
burners and the ignition pins are installed
in their original positions. Check the sparks
before operating the grill. (Fig. 51)
5. Adjust the side burner air shutter so that
it is halfway open and re-install the side
burner. (Fig. 52)
6. Take the knobs off valve stems and adjust
the screws as shown in Fig. 53 using
the athead screwdriver. Turn the screw
clockwise until it stops.
Make sure to completely tighten the
screws. Failure to tighten the screws will
result in the low heat setting working
improperly.
21
air shutter
51
Air Shutter
Adjustment
52
53