Instruction manual
30
Lowes.com/masterforge
CONVERSION INSTRUCTIONS
Conversion Instructions for Item #0097709
1. Change grill burner valve orices
a. Remove the cooking grates, warming rack
and ame tamers.
b. Remove the electrode screws and cotter
pins that hold the burners in place. Set
the screws and pins aside. Remove the
burners from the grill by lifting them up and
out.
c. Use orice removal tool (B) to remove the
LP orice from the end of gas valve, then
install the NG orice (See Fig. 85).
IMPORTANT:
Check that the NG orice size is 1.44
and ensure the orice is properly
installed.
d. Reinstall the burners using the 2 screws
and cotter pins previously removed. Repeat
the procedure for each main burner.
e. Position the electrodes so they are 1/4 in.
(6 mm) away from each burner. (Fig. 81)
Side burner conversion:
2. Open the lid and remove the side burner
grate. (Fig. 82)
3. Remove the wing nut and side burner and
hold them in place. (Fig. 83)
21
82
81
Cotter pin
Wing nut
Electrode
screws
83