How to Guide

ASSEMBLY INSTRUCTIONS

1. Fix the tank tray bolt

1/4-20 x 1/2 in.

Screw

x 16

1/4-20 lock

Washer

x 16

Tank tray bolt

Remove the LP tank bolt on the cart base (W) as

shown in Fig. 1A and then reinstall as shown in

Fig. 1B.

Note: For all of the following steps, do not

tighten any screws completely until all

screws for that step have been installed.

Once all screws have been installed, then

tighten them securely.

2. Install casters

a) With the cart base (W) laying as shown in Fig. 2,

attach the 2 straight casters (Z) as shown to the left

side of the cart base (W) using 8 1/4-20 x 1/2 in.

screws (BB) and 8 1/4-20 lock washers (DD). Install

all screws first and then tighten.

b) Attach the 2 locking casters (V) to the right side

of the cart base (W) using 8 1/4-20 x 1/2 in. screws

(BB) and 8 1/4-20 lock washers (DD). Install all

screws loosely first and then tighten.

Hardware Used

Note: For ease of assembly, lock the 2

locking casters (V) prior to proceeding to

the next steps.