User`s manual

MI
MIMI
MI-
--
-2100 Operator
2100 Operator2100 Operator
2100 Operator Manual
Manual Manual
Manual
MI-2100 Operator Manual
-14-
3.3
3.33.3
3.3 Starting Film
Starting FilmStarting Film
Starting Film
1. Set up the Server and Projector in waiting mode, which can start the 3D film on pushing
the “Play” button.
2. Check the Sync cable connection.
3. Turn on AC Power on the control panel by pushing the up lever.
Red LED on AC Power is ON. If the sync signal (90fps, 120fps,
144fps) is not compatible with the system, WAIT LED will be flickering.
5. Push Start button. The circular polarized rotary filter starts rotating
and WAIT LED button is ON.
6. After finishing sync optimization for 5 to 6 seconds, OK Green LED is
on and WAIT Red LED will automatically turn off.
7. Starting the 3D film by pushing the Play button on the Digital Server.