User`s manual
MI
MIMI
MI-
--
-2100 Operator
2100 Operator2100 Operator
2100 Operator Manual
Manual Manual
Manual
MI-2100 Operator Manual
-7-
2.
2. 2.
2. Overview
OverviewOverview
Overview of
of of
of Main Parts
Main Parts Main Parts
Main Parts
2.
2.2.
2.1
11
1
Circular
Circular Circular
Circular Polarized
PolarizedPolarized
Polarized Rotary Filter
Rotary Filter Rotary Filter
Rotary Filter
Circular Polarized Rotary Filter Part consists of two parts - the left
image and right image circular polarized rotary filter. This creates a
brighter and more realistic constant stereoscopic 3D image by
rotating the filter either in 48 (2,880 rpm) cycles, which consist of half
right image frame, and half left image frame per second. In other
words, 96 frames (48 frames for left image and 48 frames for right
image) or 72 (4,320rpm) cycles per second - 144 frames (72 frames
for left image and 72 frames for right image). Circular Polarize Rotary Filter is protected by a safety
cover owing to high-speed rotation.
* Remarks: General personal computer is 60 cycles (3,600rpm), i.e. 120 frames per second.
2
22
2.
..
.2
22
2
Driving Part
Driving PartDriving Part
Driving Part
A motor drive makes circular polarized rotary filter rotate rapidly in
accordance with the sync signals of left and right images projected
from the Projector.
A excellent servo motor can make circular polarized rotary filter run
with minimum noise and precise controls guarantee safety and
reliance for the user.
Also, a circular polarized rotary filter can be adjusted to higher and
lower angles, and level horizontal locations between the projector lens
and the circular polarized rotary filter can also be adjusted.
2.3
2.32.3
2.3
Height Adjustment
Height AdjustmentHeight Adjustment
Height Adjustment
The height adjustment of the filter is controlled by the Control Panel.
An operator can easily exchange a 3D system for a 2D system by
adjusting the circular polarized rotary filter location of the MI-2100, i.e.
when the operator wants to exchange 2D film into 3D, you can just
lower filter location so as not to block the left and right images
projected from projector.
If you want to go up or down circular polarized rotary filter location,
press the “UP” button or “DOWN” button of 3D Filter Position on the