User`s manual

MI
MIMI
MI-
--
-2100 Operator
2100 Operator2100 Operator
2100 Operator Manual
Manual Manual
Manual
MI-2100 Operator Manual
-8-
①
②
③
④ ⑤
⑥ ⑦
⑧ ⑨
⑩
Control Panel. This function does not work while the system is in
operation.
2
22
2.
..
.4
4 4
4 Control Panel
Control PanelControl Panel
Control Panel
① AC POWER : POWR ON / OFF.
② EMERGENCY : stops operating system.
③ START/STOP : start or stop circular polarized rotary filter rotation.
④ WAIT : Wait (Red LED) is on right after circular polarized rotary filter rotation.
⑤ OK : OK (Green LED) is on after synchronizing the left and right images, The “Wait” (Red LED)
will turn off at the same time.
⑥ PWR : When power is on, PWR (Red LED) is on
⑦ ALRAM : When the user presses the emergency button or the motor controller has a problem,
the Alarm (Red LED) will light up.
* ALARM Turing off : First, turn off the power and press the emergency button.
⑧ UP : Go up the circular polarized rotary filter part
⑨ DOWN : Go down the circular polarized rotary filter part.
⑩ SYNC IN : SYNC IN is connected to the GPIO port (port 1) of the Projector, which receives the
left and right image sync signal from the projector