User's Manual

Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260

5 P57672 REV A

Tools & Materials

Safety Glasses

7/32” (.218”) Drill Bit

Hearing Protection

19/64” (.297”) Drill Bit

Gloves or Similar Hand Protection

Cordless Drill (1/2”)

Tape Measure (1/16” graduations)

Step Drill Bit

Pencil

Nutsert Install Tool and Bits

ESD Approved Vacuum

#10-24 Tap

Automatic Center Punch

#10 Flat head Screw Driver

#10 Hex Driver

The Tools list and provided hardware is suitable for use with installations on metal surfaces. Different tools and hardware

(not provided) may be required for proper installation on other mounting surfaces.To ensure proper mounting, use hardware

type and sizes that are suitable for your specific installation.

Product Notice:

This product is not intended or rated for use in life-critical control applications. Please verify requirements for your specific

installation by consulting electrical code and other local regulations and obtain approvals in writing.

FCC: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

1.86

14.88

7/32” (.218) ø

4 Places

5.25

2.625

3.50

1.75

1.00 ø