User's Manual

Master Lock Company LLC, Milwaukee, WI 53154 U.S.A. | 800-574-7260

8 P57672 REV A

Assemble

1. Place the Keypad Gasket followed by the Bluetooth

Keypad 27213 into the Weather Cover, aligning the center

hole and mounting holes. Pass the keypad wire pigtail

through the center holes.

2. To attach the Keypad to the weather cover, insert the (4)

#10-32 x ½ flathead screws into the mounting holes in the

Weather Cover exterior as shown.

3. Place the Weather Cover Gasket over the back of the

Weather Cover with the wires from the Keypad passing

through the center of the Keypad Cover Gasket.

Weather Cover

Keypad Gasket

Bluetooth Keypad

Weather Cover Gasket