- Master OWNER'S MANUAL PORTABLE FORCED AIR HEATER BR150CE

11
102384
Spark Plug
1. Remove upper shell (see
page 10).
2. Remove fan (see page 15).
3. Remove spark plug wire
from spark plug.
4. Remove spark plug from
burner head using 13/16"
open-end wrench.
5. Clean and regap spark plug
electrodes as follows:
2.8 mm (0.110") gap
6. Install spark plug in burner
head.
7. Attach spark plug wire to
spark plug.
8. Replace fan (see page 15).
9. Replace fan guard and
upper shell.
Figure 9 - Spark Plug Gap
Figure 8 - Spark Plug Removal
Burner
Head
Spark Plug
Wire
Spark
Plug
Bend Here
to Adjust
Gap
Gap