Product Manual

320.340.6464
5
TOOLS
PARTS
Locate two screw holes on front of Sprayer Tank.
With screws, install Gun Clips to the front of Sprayer Tank. Be sure
the open end is facing the top of the Sprayer.
Attaches Gun Clips to Sprayer Tank
5.
Locate the Spray Gun Assembly and connect the hose to the
hose barb coming out of the 12V Diaphragm Pump.
Secure with 3/8” Snapper Hose Clamp. Tighten with Pliers.
TOOLS
PARTS
6.
Attaches Gun Assembly to Sprayer
NOTE: If you have a complete
broadcast sprayer, skip this
step and move on to step 7-9.
TOOLS
PARTS
Slip the 3/8” Hose Clamp over the end of the Spray Gun Hose.
Push Spray Gun Assembly Hose onto the bottom hose barb of the
Pressure Regulator Assembly and tighten the 3/8” Hose Clamp
with Pliers.
Connects Spray Gun to Regulator
8.
Slide locking clip on 12v Diaphragm Pump to open the port.
Insert the quick attach side of Pressure Regulator Assembly into
open port. Slide locking clip into the “locked” position.
TOOLS
PARTS
7.
Installs Pressure Regulator Assembly
NOTE: Connect Return Hose
to the hose barb on the back
of the Pressure Regulator
Assembly.
Slip ½” Snapper Hose Clamp
over Return Hose. Tighten
with Pliers.