SDS

Revision -1 on 01-03-06
ABS (Acrylonitrile-Butadiene-Styrene)
Material Safety Data Sheet
CHEMICAL PRODUCT/ COMPANY NAME
Product Identifier:
ABS (Acrylonitrile-Butadiene-Styrene)
Product Description: ABS Plastic Pellet
Product Grades: ATTXXX, AGAXXX, AAAXXX, AIAXXX, AAOXXX, AIBXXX
(XXX=3 digit number) example: ATT607 or AGA60
5
Product Use: May be used to produce molded or extruded articles or as a
component of other industrial products.
Company Identification:
MANUFACTURER/DISTRIBUTER
Edinburg Plastics, Inc.
135 Rosemont S
t
Phone# [phone] US
A
Albany, NY 12203-2422 USA (Country Code= 001)
COMPOSITION / INGREDIENT INFORMATION
% Materials CAS Number
> 97
ABS (Acrylonitrile-Butadiene-Styrene)
009003-56-9
<3 Non-Regulated Lubricators, Colorants, And Stabilizers NA
<1 Carbon Black 01333-86-4
Note: (> = Greater then) and (< = Less then) the number following the < or > symbol.
There are no known toxic chemical is required under Section 313 of Title III of the Superfund
Amendments and Reauthorization Act of 1986 and 40 CFR part 372.
HAZARDS IDENTIFICATION
Emergency Overview:
Solid pellets with slight or no odor. Spilled pellets create slipping hazard. Can burn in a fire
creating dense toxic smoke. Molten plastic can cause severe thermal burns. Fumes
produced during melt processing may cause eye, skin and respiratory tract irritation.
Secondary operations, such as grinding, sanding or sawing, can produce dust which may
present a respiratory hazard. Product in pellet form is unlikely to cause irritation.
Chronic/Carcinogenicity:
None of the components present in this material are listed b
y
IARC, NTP, OSHA, or ACGIA as a carcinogen.
MSDS
Copyright 2004-2006 Edinburg Plastics, Inc.
Page 1 of 4
18537 Vineyard Point Ln
Cornelius, NC 28031-7989
USA