Owner`s manual

12DO NOT DIVE.
GLOSSARY OF SPA TERMINOLOGY
6. AQUATERRACE WATERFALL / AQUAKRYSTAL VALVE
Located on the topside of the spa, this valve adjusts water flow to the AquaTerrace waterfall
and the AquaKrystal Jets.
NOTE: When water features are not going to be used for an extended period of time, turn valve
slightly to allow some water to flow when pump is on to prevent stagnent water from
developing in the water lines.
7. AIR CONTROL VALVES
These are located around the top of your spa. You may increase or decrease the force of your
jets by opening or closing the air control valves. Typically, one dial controls the air to water
ratio and mix to one group of jets. When not in use the air controls should be kept in the
closed position, as air bubbles tend to cool the water.
8. TOPSIDE CONTROL PANEL
You may safely control spa functions from inside or outside your spa using the Topside
Control Panel. This Panel is used to control the water temperature, pumps, the spa light,
automatic filtration cycles and other advanced functions. The digital display will give you a
constant temperature readout and will notify you in case of certain malfunctions. Several user
programmable functions are also available.
AquaTerrace Waterfall / AquaKrystal Valve AquaKrystal
Air Control
NOTE: Due to slight differences to hydrostatic pressure the AquaKrystal balls may not rotate at the
same speeds. The AquaKrystal ball is made of glass and is fragile. Care must be taken not to
drop it on the spa or any other hard surface.