Owner`s manual

America’s Leader In Luxury

MASTER SPAS

WA TER QUALITY MAINTENANCE SCHEDULE-ECO PUR

™

Master Spas and Down East Spas

BEFORE EACH USE - Add 1 tablespoon of non-chlorine shock or 1/3 tea

spoon of Dichlor to spa per 250 gallons.

ONCE A WEEK - Add 3 Tablespoons of a non-chlorine shock or 1 tea

spoon of Dichlor to spa per 250 gallons.

3 TIMES A WEEK - Test water using chemical test strips.Adjust sanitizer,

pH and Alkalinity accordingly.

ONCE A MONTH* - Soak your filter elements overnight in a bucket with spa

Filter Cleaner and then rinse with clean water before

re-inserting. (The ECO PUR

™

mineral element should

never be cleaned in a filter cleaner. Just rinse

with water.)

EVERY 180 DAYS - Drain and refill your spa, replace with a new

ECO PUR

™

element, repeat start up procedure.

AS NEEDED - If water looks hazy, shock treat with 1 teaspoon of

Dichlor per 500 gallons.

* Depending on bather load and frequency of use, drain and refill times may

vary as well as the frequency of cleaning your filters.

* Spa Clarifier may be used (use only recommended doses per bottle).

*Foam Gone may be used when excessive foaming occurs. Be sure to use only

a drop or two at a time. Over use of Foam Gone will result in cloudy,

milky water.

NOTE:

As an alternative to non chlorine shock, Dichlor may be substituted.

1 tsp. Dichlor = 3 tablespoons of non chlorine shock

USE ONLY SPA CHEMICALS

(some pool chemicals are not suitable for spa use).

* when cleaning filters, be sure to never have the pumps (including the

circulation pump) running without the filters in place. Failure to do so may

result in debris in the pumps causing unwarranted damage.

MS Owners Manual 12/5/03 1:57 PM Page 25