Owner`s manual

America’s Leader In Luxury

MASTER SPAS

DOWN EAST (2 -3 PUMP SYSTEM)

Jets 2

Press the "Jet 2" button once to turn pump 2 on or off. If left running, the pump

will turn off after 15 minutes. *

Jets 3

Note: For SE models only. Press the "Jets 3" button once to turn pump 3 on or

off. If left running, the pump will turn off after 15 minutes. *

Light

Depending upon how your spa is equipped and configured, the "Light" button

will operate in one of the following ways:

1.) Press the "Light" button to turn the spa light on and off.

2.) If an LED light with color rotation is installed, press the "Light" button once

to start the light and wheel, and then again to turn the light off.

If any light is left on, it will automatically turn off after 4 hours.

Circ Pump (optional on 2 pump models, not available on SE models)

If your system is equipped with a circ pump, it may be configured to work in one

of the following ways:

1.) The circ pump operates continuously (24 hours) with the exception of

turning off for 30 minutes at a time when the water temperature reaches

3˚F (1.5˚C) above the set temperature (most likely to happen in very

hot climates).

2.) The circ pump stays on continuously, regardless of water temperature.

(Standard factory setting.)

The pump and the ozone generator will run during filtration. At the start of each

filter cycle, the lowest speed of pump 2 will run for 5 minutes.

Setting Filter Cycles

The first filter cycle ("day") begins 6 minutes after the spa is powered up. The

second filter cycle ("night") begins 12 hours later. Filter duration is programma-

ble for 1 -12 hours (F1-F12). The default filter time is 2 hours. To program,

press "Cool" or "Warm" then "Jets 1". Press "Cool" or "Warm" to select the

filter duration. Press "Jets 1" to select the number of filter cycles. The display

will show "dn" (both "day" and "night" cycles); "d" (day cycle only); or "n"

("night" cycle only). Press "Cool" or "Warm" to adjust, then continuous

filtration, use F12 and "dn".

*15-minute timeouts may be changed to 30 minutes and 2-hour timeouts may be

MS Owners Manual 12/5/03 2:04 PM Page 45