Owner`s manual

37DO NOT DIVE.
sensor-related messages
TS 6.1, TS 67.15, TS 7.1, TS 7.15
Sensor-Related Messages
Miscellaneous Messages
READY
RANGE
FLTR1
seNsor balaNCe is Poor
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
seNsor balaNCe is Poor*
The temperature sensors are out of sync. The Sensor Balance is poor fault has been established for
at least 1 hour. Call for Service.
seNsor Failure – seNsor a, seNsor b
A temperature sensor or sensor circuit has failed. Call for Service.
29
DO NOT DIVE.
* This message can be reset from the topside panel with any button press.
No CommuNiCatioNs
The control panel is not receiving communication from the System. Call for Service.
READY
RANGE
FLTR1
°F or °C is rePlaCed by °t
The Control System is in Test Mode. Call for Service.