Owner`s manual

MAINTENANCE RECOMMENDATIONS
28DO NOT DIVE.
CARE OF LAMINAR FLOW JETS:
•InordertokeepyourLaminarFlowJetsoperatingproperly,followtheseinstructionsinsequence:
- Turn off Laminar Flow Jets
- Remove outer ring by turning face counter clockwise
- Remove internal Jet insert with a pair of needle nose pliers
- Clean plastic filter at the back of the Jet insert so all holes are free of debris
- Reinstall Jet insert and outer ring
NOTE: To prevent premature failure of your spa cover, always turn Laminar Flow Jets down so that
they do not hit the cover when the cover is closed. You do not want to completely turn jets off.
Doing so may cause a build up of stagnant water in the water line if not used often.