Owner`s manual

37DO NOT DIVE.
flip (invert display
Flip (Invert Display)
Adjusting Filtration
28
DO NOT DIVE.
Several Seconds
or
Sub-Menu Detail – FLIP (Invert Display)
SET SET
Toggle the inversion of the segmented characters
Pressing Light when the display is toggled will go to Main Screen.
READY
RANGE
FLTR1
04-11-09
While the Temperature is
still flashing, press Light
repeatedly until FLIP
appears in the LCD.
SET
RANGE
Main Screen
Main Screen
READY
RANGE
FLTR1
To next item in
Main Menu
If not toggled
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Note:
Some panels may have a dedicated FLIP button, which allows the user to flip the display with a
single button-press.
maiN FiltratioN
Filter cycles are set using a duration. Each setting can be adjusted in 1-hour increments. Filter Cycle
1 and Filter Cycle 2 (if enabled) are set to the same duration.
Sets Filter length in hours
SET
FLTR12
While the Temperature is
still flashing, press Light
repeatedly until FLTR
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR12
Main Screen
READY
RANGE
FLTR12
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
If Filter Cycle 2 is enabled, Filter 12 will appear in the LCD. If Filter is disabled, Filter 1 will appear.
Purge CyCles
In order to maintain sanitary conditions, secondary Pumps will purge water from their respective
plumbing by running briefly at the beginning of each filter cycle.