Owner`s manual

23
I
Initial Operating Instructions:
Start-Up and Refill Procedures
Your Saratoga Spa has been tested at the manufacturing plant to ensure that all the spas
functions operate. During the test procedure, a small amount of water may have remained in
the spas plumbing. Through the shipping process water may have spotted the spas shell. You
may need to wipe down the shell with a soft cloth. Please read and follow the start-up
instructions to ensure a successful start-up or refill.
Important:
• Inspect and clean spa shell of any debris
• Do not turn power on to spa unless filled with water to appropriate level (See
Page 24). The spa pack must never be operated without water in the spa; serious
damage to the heater and/or pump(s) may result.
• Do not fill spa with water before checking the items below (below items may
become loose in transit):
• Do not fill spa with hot water. This may cause a false error code to the high limit
sensor.
A
A
C
C
a) Hand tighten unions at the
pumps
b) Tighten drain valve
Note: Drain Valve is left open for
shipping - drain valve must be
closed before filling spa.
c) Tighten unions on
heater