Owner`s manual

44
C
Control Panel Functions
Main Control Panel
The panel/topside will indicate the operations of the hydro jet pump(s), air blower, spa light,
water temperature and will display diagnostic symbols.
Saratoga Spa models are equipped with a main control panel located on the top collar of the
spa. The main control panel controls all of the spa functions. It displays the spa’s status and
any error messages. The main control panel and digital display are illuminated by a light from
the inside of the panel.
The Victoria model has an additional satellite panel located across from the main control
panel that allows the spa user to operate the jets and blower from the other side of the spa.
Main Control Panel Buttons and Digital Display
The main control panel has buttons which the spa user presses to set the temperature, vary
the intensity of the light and activate or deactivate the hydro jet pump(s). The control panel
also has a digital display that displays the spas diagnostics (ie-temperature setting, jet functions
or error messages).
TEMPERATURE CONTROL
The set temperature range is from 59ºF (15ºC) to 104ºF (40ºC). The set temperature of the
spa water will automatically be 95ºF (35ºC) the first time that power is applied. This is the
setting programmed at the factory. If power is disconnected from the spa, it will automatically
revert to the last set temperature when power is reapplied.
To display the set temperature of the spa, press the Cool or Warm button once. The set
temperature will be displayed unless the control panel is locked.
To increase the set temperature of the spa water, press the Warm button twice. Pressing the
button once will display the current set temperature. Pressing the button again will increase
the set temperature by one degree.
To decrease the set temperature of the spa water, press the cool button twice. Pressing the
button once will display the current set temperature. Pressing the button again will decrease
the set temperature by one degree.
Note: The temperature shown on the display without pressing on any of the temperature
buttons reflects the temperature of the water at that particular moment.
CONSERVE BUTTON
The Conserve button gives the user the ability to program the number of hours the spa
filters. Your Saratoga Spa is factory programmed to filter 24 hours a day. By using the