Owner`s manual

Conserve button, the filtering cycles can be adjusted. Each filtration cycle setting will run

twice in a 24 hour period. The filtration cycles can be adjusted from 0 to 12 (0 equals no

filtering and 12 equals 24 hour filtering). To program the filtering cycles, press and hold the

Conserve button until the topside window displays a two-digit number. Release the

Conserve button and then use the warm or cool button(s) to reach the desired setting.

Once the desired setting has been displayed in the topside window, press the Conserve

button to confirm the setting. At that time the new filtration cycle will begin.

Note: Saratoga Spa does not recommend setting the filtration cycle to zero (0). Non-

filtered water can create odors, become cloudy, and also be generally unhealthy.

Operating the Hydro Pumps

JETS 1 BUTTON

Activates the hydro jet pump for maximum hydrotherapy jet action. Press Jets 1 button

once for low speed (Jets 1 triangle icon will flash). Press Jets 1 button again for high speed

and again to turn off (Jets 1 triangle icon will stay solid when Jets 1 is on high speed). Jets 1

will automatically shut off after 15 minutes of operation on low/or high speed.

Note: On 110 Volt systems there is only one speed on the jet pumps.

JETS 2 BUTTON

This button will activate the secondary hydro jet pump for additional hydrotherapy jet

action. Press Jets 2 button once for low speed (Jets 2 triangle icon will flash). Press Jets 2

button again for high speed and again to turn off (Jets 2 triangle icon will stay solid when

Jets 2 is on high speed). Pump will automatically turn off after 15 minutes of operation on

high or low speed.

JETS 3 BUTTON

(VICTORIA AND PAVILION MODELS)

This button will activate the 3rd hydro

jet pump. Press Jets 3 button once for

high speed and again for off position

(Jets 3 triangle icon will stay solid when

pump is on). Pump will automatically

turn off after 15 minutes of operation.

OPTION BUTTON

Activates the 3 stage Blower. Press the Blower button once for high, again for medium again

for low and then off. When operating, bubbles of air will come from air jets or Versa-Flo™

jets in the spa. Blower triangle icon will stay solid on high speed. Blower triangle icon will

flash on medium or low speeds. The blower will turn off after 15 minutes of operation.

Note: The spa light will begin flashing 15 seconds before the pumps shut off as a reminder,

that the pump(s) cycle is about to end.

Note: Saratoga spas are designed for maximum heat retention. The unit is not designed to

cool water. If the set or desired temperature is below that of the ambient temperature, the

unit will not be able to achieve this demand. Depending on the desired temperature, it may

be necessary to add cool water to the unit to lower your spas water temperature.