Owner`s manual

3. To reinstall the spa pillow, carefully bend the pillow slightly to allow the pins to slip into the

pin retainer on the spa shell.

4. Keeping the pillow slightly bent, slide the other pins (opposite end) onto the pin retainer

on the spa shell.

5. After all the pillow pins are in place, press the pillow down into the recess in the spa shell.

Important:

Just pulling the pillow straight up, and out of the shell recess, will eventually

damage the pillow. This abuse is not covered under warranty.

Care of the Exterior

SPA SHELL

Your Saratoga Spa is manufactured with a tough acrylic surface. Some staining or water

marking may occur at or above the water surface. Removal of these surface conditions can

usually be accomplished with a soft cloth by merely wiping them away. Stubborn stains can

be removed first by draining the spa and then using a nonabrasive product. Always thor-

oughly rinse off any spa shell cleaning agent with fresh water.

Important:

Keep all cleaners out of the reach of children and use care when applying.

SPA CABINET

The skirt around your Saratoga Spa is manufactured with the finest quality material and is

available in a low maintenance exterior or wood exterior.

WOOD SKIRT

A good quality wood sealer or natural color wood oil should be applied on the wood skirt

twice a year to keep your spa skirt looking as good as new. Your Saratoga Spa dealer may

stock original factory finish or recommend another sealer that is available in your area.

Note: Discoloration of the wood spa skirt is considered natural and is not covered by the

spa surface warranty.

WEATHER ALL SKIRT

The Weather All skirt combines the durability of plastic with the look of professionally

finished wood. To remove any stains or dirt simply spray the skirt with water and wipe down

with a soft cloth. Weather All is not designed to be stained or resealed.

Note: Weather All could experience natural fading due to sunlight and weather exposure.

Care of the Spa Cover

VINYL COVER

Your vinyl thermal spa cover has been designed for your particular spa. Monthly cleaning and

conditioning is recommended to maintain its beauty.

To clean and condition the vinyl cover:

1. Remove the cover from the spa and gently lean it against a wall or fence.

2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.