Owner`s manual

____________________________________________________________________________________________
__________________________________________________________________________________________
11
PORTSMOUTH/EXETER
PORTSMOUTH/EXETERPORTSMOUTH/EXETER
PORTSMOUTH/EXETER
(1
(1(1
(1 PUMP OR
PUMP OR PUMP OR
PUMP OR 2
22
2 PUMP
PUMP PUMP
PUMP S
SS
SYSTEMS
YSTEMSYSTEMS
YSTEMS)
))
)
Your spa side control panel consists of two main parts. The control pads operate individual
functions and allow for several programming modes. The LED Display shows constant water
temperature and will monitor various functions.
TEMPERATURE CONTROL
TEMPERATURE CONTROLTEMPERATURE CONTROL
TEMPERATURE CONTROL
Your spa will maintain the water temperature for whatever it is programmed. It has been factory
set at 100° F. Temperature adjustment is controlled by pushing the “Temp” button. The display
shows the actual water temperature unless the pad is pressed. When the pad is pressed, the
display will show the set temperature. Pressing the pad a second time will cause the set
temperature to increase or decrease depending on what direction was last chosen. Each
successive press will change the set temperature in the same direction.
If the opposite direction is desired, release the pad and let the display revert to the actual water
temperature again. Press the pad to display the set temperature, and again to make the
temperature change in the desired direction.
JET
JETJET
JET /
//
/ PUMP
PUMPPUMP
PUMP OPERATION
OPERATIONOPERATION
OPERATION
The Portsmouth and Exeter models are equipped with a dual speed pump(s) system which
operates on either high or low speed. Pressing the “Jets” button once will turn the pump on low
speed. Press again for high speed and once more for off. On the two pump models, the second
pump is activated only in high speed.
As a safety feature your system has been designed to shut off automatically after a specified time
period. This will occur after the spa has been running for 30 minutes on high speed or after 60
minutes on low speed. To reactivate the pump(s) simply press the pad again.
Also, as a safety feature your spa is equipped with ”Freeze protection.” Should the water
temperature drop to 40° F, the pump will activate to protect the system from freezing. It is
recommended that if you are going to be away from your spa for a long period of time during
unusually cold weather that you contact your Down East Spas dealer for proper winterizing
details or see the section “Winterizing Your Spa.”