Owner`s manual

GLOSSARY OF SPA TERMINOLOGY

1. DRAINING YOUR SPA. The drain is located behind the

front panel on the far right side. You can access the drain

by unscrewing the corner screws and removing the corner

panel. Grasp the drain cap, and pull the assembly out all

the way. Unscrew the cap, and push the assembly back in

half way to start the flow of water. Attach a garden hose,

if desired. Draining times may vary by model using the

external hose bib. A sump pump may also be used to

drain the spa quickly. NOTE: When pushing or pulling the

assembly in or out, water will drip from the drain during

the transition. This is normal.

2. JETS 1 PUMP. This pump produces water flow through the main jets in the

spa. This pump may be operated on two speeds. The low speed will produce

efficient water circulation and gentle jet action. High speed should be used

for maximum jet action. In spas not equipped with a 24 hour circulation

pump, this pump also moves water for the heat and filtration cycles.

3. JETS 2 PUMP. (If so equipped) This produces water flow through the

designated jets and has only one speed.

4. JETS 3 PUMP. (If so equipped) This produces water flow though the

designated jets and has one speed.

5. CIRCULATION PUMP. (If so equipped) This pump runs 24 hours a day and

moves water for heating and filtration. Spas equipped with this pump do not

have filtration cycles as they are not necessary in this configuration.

6. JET DIVERTER VALVE. Located on the topside of the spa, this valve physically

diverts the flow of water from one jet zone of the spa to another jet zone.

Be sure that no sand or particles are brought into the spa as they will cause

the diverter to seize up. It is best to turn the diverter valve only when the

pump is turned off.

7. PUMP UNION. These are used by service personnel to easily service the

jet pump(s).

8. HEATER UNION. These are used by service personnel to easily service the

spa heater assembly.

9. OZONATOR. Your ozone generator will operate

in conjunction with your filtration system. It will

deactivate when any other control function is manually

activated and will reactivate after one hour.

Ozonator (optional)