Manualshelf

Owner`s manual

ManualsBrandsMaster Spas ManualsHome building and DecorTS 120
41424344454647484950
Warning: Never remain in your spa longer than 15 minutes per session when
the water temperature is above 98˚F. If you wish to spend more time in your spa,
whether enjoying music, or just lounging, be sure to keep the spa water at or
below body temperature (98.6˚F).
TWILIGHT DOCKING STATION
41
*Please refer to your stereo Owner’s Manual for specific operations.
Optional Stereo Docking Station
Your spa is equipped with an iPod™ docking station that will allow you to listen to
personal selections through the audio system of the spa. This audio system also has an
FM only radio receiver that can be used to listen to local FM broadcasts. Due to vary-
ing signal conditions the FM radio reception may be limited.
The docking station is compatible with the following iPod™ products Nano™ 3G
4G 8G, iPod Touch™ 8G 16G, iPod Classic™ 80G 160G, and iPod™ 5G 30G 60G 80G.
Master Spas, Inc. does not guarantee compatibility with all iPod™ products due to
software changes and upgrades.
The wireless remote provided with the spa is water resistant, but should never be left
in the spa when not in use.
RF Remote Control Synchronizing
Each docking station comes with a matching wireless remote control. From time to
time it may be necessary to synchronize the remote to the docking station.
A. Press and hold the (play/pause) button on the remote control and then press the
power button simultaneously for 2 seconds. The LCD will display “PAIR”.
B. Turn on the docking station by pressing the power button on the station within 10
seconds after the remote displays “PAIR”. A red light will turn on under the power
button to indicate the unit is turned on.
C.
Once the synchronizing is complete, the LCD will return to the original screen setting.
If your music player is not an iPod, ™, you will only be able to use the volume and power control on the remote control.
In order to prolong remote battery life the LCD will shut off in 10 seconds if no other button is pressed. To turn remote
back on press power once and then press the command desired.