Instruction manual

Technical parameters of the instrument:
RS 485 Interface:
Receiver-Input Resistance: 96 kΩ
Devices on bus: max. 256 (1/8 Unit Receiver Load)
Measuring parameters:
Temperature probe: Pt1000/3850 ppm connected by shielded cable of maximum length 10m
Measuring temperature range: -200 to +600 °C (can be limited by applied temperature probe
model)
Resolution: 0.1 °C
Accuracy (without probe): ±0.2 °C
Recommended calibration interval: 2 years
Measuring interval and LCD display refresh: 0.5 s
Power: 9 to 30 V dc
Protection: IP65
Operating conditions:
Operating temperature range: -30 to +80 °C, over +70°C switch LCD display OFF
Operating relative humidity range: 0 to 100 %RH
Outer influence in accordance with EN 33-2000-3: normal environment with those
specifications: AE1, AN1, AR1, BE1
Working position: negligible
Electromagnetic compatibility: complies EN 61326-1
Not allowed manipulation
It is not allowed to operate the device under conditions other than specified in technical parameters.
Devices are not designed for locations with chemically aggressive environment.
Storing conditions: temperature -30 to +80 °C, humidity 0 to 100 %RH without condensation
Dimensions: case with electronics 89 x 73 x 37 mm
Weight: approximately 200 g
Material of the case: ABS
End of operation
Device itself (after its life) is necessary to liquidate ecologically!
Technical support and service
Technical support and service is provided by distributor. For contact see warranty certificate.
8
8