Instruction manual
Table Of Contents
Appendix A
Connection of ELO E06D converter (RS232/RS485)
(optionally accessory of the transducer TE485-102D)
The ELO E06D converter is an optional accessory for connection of transducer/transducers with
RS485 interface to the PC via serial port RS232. Connect connector marked RS232 directly to the
PC, connect power to connector marked RS485. Power voltage +6V DC from an external acdc
adapter connect to pin 9, 0V connect to pin 5. Also mutually connect pin 2 and pin 7. Link RS485
is connected across pin 3 (A+) and pin 4 (B-).
9