Owner`s manual
10
Plug the Food Processor into a 120V AC electrical outlet.6.
Insert the Food Pusher into the Food Chute and apply 7.
slight pressure.
If the Processing Bowl and the Cover are not correctly
assembled, Safety Interlock Mechanism will not be engaged and the
Food Processor will not function.
To turn the Food Processor on, Press the ON/OFF button. The unit 8.
will run continuously and the indicator light will illuminate.
PULSE function: To Pulse, Press and hold the PULSE button to start
the processing. To stop pulsing, release the PULSE button. The
Indicator Light will illuminate each time the PULSE button is pressed.
PULSE button allows precise controls of the duration and frequency
of processing.
When the Food Chute is empty, press the ON/OFF button or 9.
release the Pulse Button (the Indicator Light will go off), and unplug
the unit. Make sure that the Blade Assembly has completely
stopped before you remove the Lid or unplug the unit. It is normal
for a small piece of unprocessed food to be left between the Slicing/
Shredding Discs and Lid.
Turn the Lid counter clockwise to disengage the locking tabs and lift 10.
the Lid from the Processing Bowl.
Carefully lift the Disc before removing the Processing Bowl by 11.
turning the handle counter clockwise to disengage the locking tab
and lift the bowl from the Power Base.
The Ejector Disc is to be used with the Shredding or Slicing Discs when
is more than 4 cups of food to be processed. The Food Chute Door is to
be in the UP position.
Make sure the unit is unplugged. Attach the Processing Bowl to 1.
the Power Base. See Assembly Instructions for details.
Place the Blade Shaft onto the Drive Shaft ensuring that it is fully 2.
seated on the Drive Shaft. It may be necessary to turn the Blade
4-CUP FOOD PROCESSOR OPERATION (CONT.)