Owner`s manual

6
BEFORE FIRST USE


Carefully unpack the Food Processor and wash the Processing 1.
Bowl, Lid with Feed Chute, Food Pusher and attachments in warm
soapy water. Rinse and dry thoroughly.
Wipe the Power Base with a soft, moistened cloth.2.


ASSEMBLy INSTRUCTIONS
Before assembling the Food Processor ensure that the Cord is 1.
unplugged.
Place the Power Base facing you on a dry, level surface. 2.
Place the Processing Bowl onto the Power Base. The Processing 3.
Bowl will only sit correctly when the handle is positioned to the right
in the three o’clock position (see Figure 1).
Turn the Processing Bowl clockwise to lock into the Power Base (as 4.
indicated by the graphics on the right side of the Power Base). The
handle will be in the 6 o’clock position (see gure 2).
Determine which attachment is to be used: Chopping 5.
Blade, Slicing Disc or Shredding Disc (Refer to Instructions for Use:
Figure 1
Figure 2