Owner`s manual

7
Chopping Blade and Slicing/Shredding
Discs)
Insert the attachment of choice in the 6.
Processing Bowl over the Drive Shaft (see
gure 3).
Place the Lid on the Processing Bowl with 7.
the tab on the Lid directly to the right of
the Processing Bowl handle (see gure 4).
Ensure that the center pin of the Lid is
inserted into the center of the Blade Shaft.
Turn the Lid clockwise until it engages the
interlock of the handle (see gure 5).
 If the Processing Bowl and the Lid are
not correctly assembled, the interlock
mechanism will not be engaged and the Food
Processor will not function.
Insert the Food Pusher into the 8.
Feed Chute.
Plug the Cord into a 120V AC power 9.
outlet.
The Food Processor is now ready to begin use.10.
4-CUP FOOD PROCESSOR OPERATION
CHOPPINg





Make sure the unit is unplugged. Attach the 1.
Processing Bowl to the Power Base. See Assembly
Instructions for details.
Place the Chopping Blade over the Blade Shaft until 2.
it snaps into place to form the Blade Assembly (see
gure 6). The top of the Chopping Blade has a rim
that must slide onto the Blade Shaft with the rim
side up (see page 8, gure 7). If the Chopping Blade
Figure 3
Figure 4
Figure 5
Figure 6