Owner`s manual
8
is placed rim side down on the Blade Shaft, the Chopping blade will
not snap into place and it will not be congured correctly (see gure
8).
If Chopping Blade is
incorrectly placed onto the
Blade Shaft, use a at-tipped
screwdriver or other blunt
instrument to depress the
exible side tabs in order to
release the Chopping Blade
from the Blade Shaft.
Place the Blade Assembly onto the Drive Shaft ensuring that it is 3.
fully seated onto the Drive Shaft. It may be necessary to turn the
Blade Assembly slightly to the right or left to ensure correct
placement. You should not be able to see the metal stem.
Place up to 4 cups of the food to be chopped into the Processing 4.
Bowl (see Food Processing Hints for food preparation details).
Place the Lid on the Processing Bowl with the tab on the Lid 5.
directly to the right of the Processing Bowl handle. Ensure that the
center pin of the Lid is inserted into the center of the Blade Shaft.
Turn the Lid clockwise until it engages the interlock of the handle.
(the handle will be in the six o’clock position)
If the Processing Bowl and the Cover are not correctly
assembled, Safety Interlock Mechanism will not be engaged and the
Food Processor will not function.
Plug the Food Processor into a 120V AC electrical outlet.6.
To turn the Food Processor on, Press the ON/OFF button. The unit 7.
will run continuously and the indicator light will illuminate.
PULSE function: To Pulse, Press and hold the PULSE button to start
the processing. To stop pulsing, release the PULSE button. The
Indicator Light will illuminate each time the PULSE button is pressed.
The PULSE button allows precise controls of the duration and
frequency of processing.
Additional ingredients may be added through the Feed Chute 8.
while processing.
4-CUP FOOD PROCESSOR OPERATION (CONT.)
Figure 7
Correct assembly
Figure 8
Incorrect assembly