Owner`s manual
11
IMPORTANT CARE & SAfETy NOTES
Before use, make sure that the Blade Assembly and Rubber Gasket 1.
are properly assembled and are rmly screwed onto the bottom of
the Blender Jar.
NEVER place the Blade Assembly and Rubber Gasket onto the 2.
Blender Base unit without the jar attached.
NEVER put your hands in the Blender Jar while the Bar Blender is 3.
plugged in. If you wish to add liquids or food to the Blender Jar while
the motor is running, remove the Measuring Cap from the Bar
Blender lid and add the additional ingredients through the opening.
NEVER insert metal utensils into the Bar Blender. Use a rubber 4.
spatula to dislodge food if necessary, but NEVER do so while the
Bar Blender is turned on.
Place the Bar Blender cover on rmly. NEVER operate the Bar 5.
Blender without the cover on.
NEVER place the Blender Jar on the base unit while the motor 6.
is running.
NEVER remove the Blender Jar from the base unit while the motor 7.
is running.
Do not run the Bar Blender continuously for more than 2 minutes. 8.
Doing so may damage the motor.
Do not overload the Bar Blender. If the motor stalls for any reason, 9.
turn the motor off, unplug the Bar Blender and remove a portion of
the Bar Blender contents before resuming.
Do not add boiling liquids to the Blender Jar. Boiling liquids should be 10.
cooled for at least 5 minutes before being poured into the jar.
Do not overll the Blender Jar. Do not use this Bar Blender to mix 11.
thick dough, mash potatoes, or grind raw meat. Do not use it to
extract juices from fruits and vegetables.
Do not store foods in the Blender Jar. Keep the jar clean when not 12.
in use.
Do not use any part of your Bar Blender if chipped or cracked.13.