Instructions

UNIVERSAL COOLING SYSTEM TEST ADAPTER KIT

FEATURES

• Universal design will ﬁt most automotive radiators and expansion tanks

• Pressure test using the hand pump from the 27 piece master radiator pressure

test kit or the 14 piece universal cooling system pressure test kit.

• Vacuum test using the vacuum system ﬁller kit from the 27 piece master radiator

pressure test kit or the 14 piece universal cooling system pressure test kit.

• Ultimate coverage provided by 3 rubber ring gaskets included in the kit

• Secure ﬁt using the simple twist style design

SPECIFICATIONS

41018A Radiator Adapter

43012-2F Sealing Collar with Fitting

43012-35 OD35 x ID30 Rubber Ring

43012-39 OD39 x ID30 Rubber Ring

43012-44 OD44 x ID30 Rubber Ring

CAUTION

• Always read instructions carefully before using the tool

• Always wear eye protection that meets OSHA and ANSI Z87.1 standards

• Always wear gloves when working with the tool

INSTRUCTIONS

1. Drain the coolant from the radiator

2. Select a suitable sized rubber bushing and ﬁt it to the lower part of the radiator adapter. Insert the

adapter into the radiator or expansion tank ﬁller neck. Turn the sealing collar to make a seal between

the tools and the radiator or expansion tank ﬁller neck.

3. Check the cooling system pressure of the vehicle.

4. Using the instructions from the 27 piece master radiator pressure test kit or the 14 piece universal

cooling system pressure test kit, pressurize the cooling system and check for leaks.

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) phthalate, lead and lead compounds, which are known

to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

43301-PTA-INST