User Manual

WARNING!
Potential hazard that could result in serious injury or
loss of life.
• Carefully read all instructions in this manual and
understand them thoroughly before using the air-
powered impact wrench. Failure to comply could
result in serious injury or loss of life.
4. Press the trigger (1) of the tool for
rotating operation (Fig. C).
• Keep children away from the tools and work areas.
• Do not apply additional force to the air-powered
impact wrench in order to remove a nut.
• Do not allow the air-powered impact wrench to run
free for an extended period of time. Doing so will
shorten the life of the impact wrench. Failure to
comply could lead to serious injury or loss of life.
WARNING!
Potential hazard that could result in serious injury or
loss of life.
NOTE: Use only the impact sockets that are specifically
designed for use with this air-powered impact wrench.
2. Attach the socket (1) of required size to
the drive head (2) of the tool (Fig. B).
3. Place the socket over the nut to be
removed or installed.
5. Adjust the regulator knob (1) at the rear
end of the tool to control the speed of
the airflow and to adjust the direction of
rotation (forward and reverse) (Fig. D).
1. Plug in compressor, turn it on, set the
pressure regulator to 90 PSI, attach one
end of the air hose to the compressor
and the other end of the air hose (1) to
the tool (2) (Fig. A).
OPERATION
6. Verify that the air supply is clean and
that air pressure does not exceed 90 PSI
(6.3 bar) while operating the air-powered
impact wrench.
15
14
model no. 058-9849-2 | contact us 1-800-689-9928