Specifications

Your safety, as well as the safety of others with and around you, is a direct result of how you operate and maintain your
boat. Read and comprehend this manual. Make sure that you understand all the controls and operating instructions before
attempting to operate the boat. Improper operation is extremely dangerous!
The basic safety rules are outlined in this section of the manual. Additional precautions throughout the manual are
noted by the following symbols:
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
BOATING
SAFETY
The precautions listed in this manual and on the boat
are not all-inclusive. If a procedure, method, tool or part
is not specifically recommended by MasterCraft, using it
may place you and others in an unsafe situation; as well,
you may render your warranty void. Remember: Always
use common sense when operating, servicing or repair-
ing the boat!
In addition to everyday safety, failure to observe the
safety recommendations may result in severe personal
injury or death to you or to others. Use caution and
common sense when operating your boat. Don’t take
unnecessary chances!
Be certain that all boat operators are aware of this
information and conform to boat safety principles.
2006 MasterCraft Owners Manual–Page 1-1
MasterCraft
President and
CEO John
Dorton prepares
for a run during
an INT event
while wearing
his own PFD.
GENERAL PRECAUTIONS
Boating safety starts with a thorough understanding of operation. In
addition to careful review of this manual, you should be aware as well that
there are many sources of information available. MasterCraft urges you to
pursue additional training.
The following is a listing of just some of the agencies and organizations that
offer safety training or information.