Specifications

2005 MASTERCRAFT OWNERS MANUALPAG E 21-1
LIMITED
WARRANTY
STATEMENT
> > > >
MasterCraft Limited Warranty Statement
1. Limited Warranty and Term.
MasterCraft warrants to the original retail purchaser that the following components of each new boat shall be free from
material defects in materials and workmanship to the extent set forth below, under normal use and when operated and maintained
in accordance with MasterCraft’s instructions, for the period indicated:
(a) Deck, Hull, Liner and Stringers—From the date of the original retail purchase, the deck, hull, liner and stringer system
(collectively, “Structural Components”) is warranted for as long as the original purchaser owns the boat.
(b) Gel Coat—All exterior gel coat surfaces are covered against structural defects under the Limited Warranty and as listed
under gel coat manufacturer guidelines. Due to the environmental and customer care effects on gel coat, cosmetic concerns
must be addressed with your Customer Service representative at the dealership prior to communication with the factory.
Examples are blisters, scratches, discoloration or fade issues. Stress crazing is not covered but will be reviewed as a
customer good-will item on a case-by-case basis. Any issue determined to be an application/installation item will be
reviewed in advance to determine warranty coverage or not. Any gel coat issues will require digital, video or 35mm photos
that clearly show the reported issue.
(c) Engine/Transmission—Three (3) years from the date of the original retail purchase of the boat. The engines used in
MasterCraft boats are supplied by Indmar Products Company, Inc., in Millington, Tennessee (“Indmar”). Indmars three-
year warranty on the engine and transmission is administered at the MasterCraft factory and is subject to the terms and
conditions set forth below under “Power Train Warranty.”
(d) Other Component Parts—One (1) year from the date of the original retail purchase of the boat.
(e) Trailer and Trailer Component Parts—One (1) year from the date of the original retail purchase of the boat.
2. Warranty Conditions, Limitations and Exclusions.
MasterCraft boats are manufactured by trained craftspeople from high-quality
materials and components. However, conditions outside MasterCraft’s control require
specific limitations on, and exclusions from, coverage under this warranty. The Limited
Warranty on the Structural Components set forth in Section 1(a) above does not cover
or include the gel coat, including any discoloration, blisters, bubbles or cracks of the
gel coat, or any other components fastened or applied to the hull or deck. Furthermore,
the Limited Warranty set forth in Section 1 (including all sub-sections) above does not
cover the following:
(a) damage caused by misuse, negligence, accident, collision or impact with any
object;
(b) damage caused by any improper alteration or modification to the boat or any
of its component parts or accessories, including damage resulting from alteration,
modification, repair or replacement in such a way as to increase the cubic-inch capacity
or horsepower output of the engine and boat as originally manufactured;
(c) damage caused by the use of improper or contaminated fuel or fluids;
(d) damage caused by the use of customer-applied chemicals or accidental spills;
(e) damage caused by failure to maintain the boat in accordance with the
maintenance provisions in the Owners Manual or improper maintenance of the boat;
(f) damage resulting from the use of the boat for any racing, speed, commercial
competition or performance demonstration;