Owner`s manual

they are necessary. For example, the system automatically displays a related screen when it senses any of the
following events:
• Adjusting the trim brings up the Trim screen
• Adjusting the ballast brings up the Ballast screen
• Pushing the Perfect Pass button brings up the Perfect Pass screen
• Any alarm condition brings up a warning screen.
Selecting the DEPTH tab goes to the screen illustrated. is screen digitally displays depth, water
temperature, air temperature, and illustrates the depth trend. e system also has a user adjustable depth
alarm that can be adjusted from the SETUP tab.
Selecting the BALLAST tab goes to the screen illustrated below. It allows the driver to see the status of
all the ballast tanks installed in the boat. is tab is a plug and play tab so uninstalled ballast tanks do not
appear on the screen.
Selecting the TRIM tab goes to one of the screens illustrated below. ese screens display the position of
the installed single-trim tab or dual-trim tabs.
Selecting the MAIN tab goes to the screen illustrated in the next column. Any information available to
the instrumentation system may be selected by the driver to be displayed in this screen. is screen is orga-
nized into four (4) quadrants with the user-selected information digitally displayed in each quadrant.
To change the information displayed simply:
• Press the UP or DOWN arrows to highlight the quadrant that you wish to change
• Press SELECT to access the pull-down menu
• Using the UP or DOWN arrows highlight the desired information.
• Press SELECT again to store the change
2011 Owners Manual...Instrument Gauges and Switches...Page 5-13