Owner`s manual

2011 Owners Manual...Guide to Individual Models...Page 5-16
Quicklist Screen
e Quicklist screen displays the current rider’s settings on the left side of the screen and a list of Quick-
list Actions on the right. e active portion of the screen is highlighted with a large red frame. Arrow UP or
DOWN to highlight any action in the list with a solid red box and press ENTER to select that action.
e ADD and EDIT actions are very similar. ADD creates a new rider in the LIST and EDIT allows
changes to be made to an existing rider in the LIST.
To ADD a new rider, arrow down to ADD and press ENTER to activate the ADD mode. e large red
frame will move to the left side of the screen and a blank rider profile is active. Arrow UP or DOWN to move
the smaller red highlight box over the rider setting you wish to change and press ENTER to activate the item.
e large red frame will move to the active right side of the screen. Use the PLUS and MINUS buttons to
change the value of the item, then press ENTER to complete the change and bounce back to the left side of
the screen. Repeat the process as needed for each item you wish to edit.
To EDIT an existing rider, you must first select that rider from the list if not already active. Arrow DOWN
to highlight LIST and press ENTER. Arrow UP or DOWN to the desired rider and press ENTER. is rider is now
active. Arrow UP to highlight EDIT and press ENTER to activate the EDIT mode. Change the rider’s settings just as
you did when adding a new rider. All changes are automatically saved to the rider’s profile.
EDIT
RIDER NAME can be up to 14
characters. If the name is less
than 14, keep pushing ENTER
until the highlight box bounces
back to the left side of the screen.
ADD
SAVE CURRENT will create a rider that uses all the current boat settings.
e boat settings can be ballast levels, trim settings, and speed settings.
e rider name may be edited if desired.