Owner`s manual

2011 Owners Manual...Instrument Gauges and Switches...Page 5-21

BALLAST CONFIGURATION

is is used to set the ﬁll and empty

times for the Jabsco ballast pumps.

ey can be adjusted by pressing the

ENTER button and using the UP and

DOWN buttons.

HOME MENU [Enable or Disable]

ABOUT VIPER

Gives you the current software re

vision on the boat.

FEATURE UNLOCK

ere are two ways to unlock a new feature. In both cases, you will

need to go to the Medallion website [www.medallioinis.com] to retrieve

the unlock code.

Step 1: Get the SERIAL NUMBER

from your system by going to

either ABOUT VIPER or FEA

TURE ENABLE in the setup

screens.

Step 2: If using the IMPORT in setup,

copy the ﬁle to a USB Flash

Drive and press the IMPORT

button to read the ﬁle from

the USB Flash Drive.

Step 3: If using the FEATURE EN

ABLE SETUP, you will need

to select the feature to be un

locked.

Step 4: Enter the unlock code to en

able the feature.

ALARMS AND WARNINGS

Engine Temp is a warning received from the en-

gine ECM. See additional information under Temperature

Gauge in the Instruments and Gauges section of this Own

er’s Manual.