Specifications

Cleaning the windshield when needed is an important safety precaution. Your MasterCraft
windshield is made of tempered safety glass and requires special cleaning to prevent
scratches to the surface. Use a mild soap solution and damp cloth only. Harsh detergents,
solvents, chemicals or dry cloths could damage the windshield. Also, when your boat is in
service, avoid using the windshield as an aid for balance or getting out of a seat. This causes
undo stress on the window frame and could damage it.
Should I clean my stainless steel and chrome-plated parts?
Stainless steel and chrome-plated parts are not totally resistant to corrosion. Occasional
cleaning and polishing with a marine chrome-and-stainless polish will maintain and extend
the useful life. In salt water areas, rinse all hardware with fresh water and apply a light
coating of protective oil to enhance the appearance after each use.
Tell me more about cleaning my sun top and boat cover.
Occasional cleaning of the top and cover should be done with mild soap and warm water.
Thoroughly wet the entire surface and use a soft-bristled brush. Rinse completely and
allow to drip dry. Then allow it to lay in the sun until completely dry. After cleaning, treat
with a water repellent as necessary. For heavy soil, a mild solution of 1/3-cup bleach, 1/4-
cup household soap and one gallon of water may be used for soaking. DO NOT allow to soak
for more than 20 minutes. Longer can cause deterioration of the stitching. Rinse completely
and allow to drip dry. Then follow up with time in the sun until it is completely dry.
What can you tell me about 2010 Genuine MasterCraft Parts?
Recognizing the pride that MasterCraft owners take in their boats, MasterCraft has been
diligently working to develop our own line of products designed specifically to ensure a
better-looking, longer-lasting product. Your 2010 model ProStar, MariStar, X-Series, CSX or
300 boat is just the fourth full model year to be able to utilize these products. As you
maintain your boat over the coming years, use Genuine MasterCraft parts (GMP) to keep
the pride!
What is the best all-purpose cleaner for my MasterCraft boat?
Most MasterCraft boat owners pay attention to the details, especially when it comes to the
maintenance and life of the boat interior. We give you information here online and in your
owner's manual on how to extend the life of the boat interiors. We especially caution to
avoid certain household cleaners, powdered abrasives, steel wool and industrial cleaners
that can cause damage and discoloration. Dry cleaning fluids and lacquer solvents should
not be used because they will remove the printed pattern and gloss. No cleaner can remove
every mark or stain, but we provide information online and in the owner's manual that tell
our owners what to use and how to treat many stains. Now, with this new product,
MasterCraft Premium All-Purpose Cleaner, you can do it right! MasterCraft Premium All-
Purpose Cleaner is a powerful foam cleaner that cuts through grease, dirt and grime, the
foam clings to vertical surfaces and penetrates through dirt that accumulates. MasterCraft