6" Side Locker Actual product may differ slightly from image shown Model #: 245-1990/245-1994/245-1998/245-2002 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 2 Safety Instructions...................................................................... 3 Parts List.................................................................................... 4 Assembly and Operation............................................................ 5 Maintenance and Safety.............................................................
SAFETY SYMBOLS Model #:________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:_______________________ Date of purchase:________________________ Receipt # of purchase:___________________ Do not open more than one drawer at a time. Do not step on drawers. Do not allow children near the unit.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call: 1-800-459-4409. The keys are taped to the top shelf in the locker. 1 2 4 3 11 10 5 9 6 8 7 Ref# Description Part# Qty NOTE: 1 M6 x 16 Hex Bolt 321023 3 pcs 2 Connecting Channel 1 pc 1. Replacement keys may be ordered, using the required code which appears on the face of the lock. 3 M6 x 16 Counter 320052 Sink Screw 4 pcs 2. G ive the information for service parts: part number and quantity.
ASSEMBLY AND OPERATION NECESSARY TOOLS REQUIRED FOR ASSEMBLY • 10 mm socket • Phillips screw driver • Extension ratchet IMPORTANT: THIS STORAGE LOCKER WILL FIT ON VIRTUALLY ANY CABINET 41" OR WIDER. THE UNIVERSAL MOUNTING SYSTEM FITS MOST TOOL STORAGE CABINETS WITH A TOP LIP MORE THAN 1/2" THICK AND AT LEAST 24" DEEP. HANG THE SIDE LOCKER NOTE: Two or more people may be required to complete this step. CAUTION: This product should not be mounted on an empty cabinet. Hang the side locker on your cabinet.
ASSEMBLY AND OPERATION INSTALL THE SHELVES TO REMOVE DRAWERS Insert the shelf support brackets into the slots on the side of the locker at the desired height. Make sure that all four shelf support brackets are at an equal height. Insert the shelf at an angle slightly above the brackets and lay down flat. Pull the drawer out so it is almost fully extended. PUSH UP on the black release lever on one side, while PULLING DOWN on the black release lever on the other side.
ASSEMBLY AND OPERATION TO REVERSE THE DOOR Put the door into position and fasten the screws on the hinge. The door is pre-installed with the hinge on the left. To install the door on the right, loosen the screws on the hinge and remove the door from the locker. Install the hanger and connecting channel on the left side of the locker. Turn the door upside down. Rotate the locking bar so that the longer section is on top and the shorter section is on the bottom.
MAINTENANCE AND SAFETY MAINTENANCE Lubricate the slides twice a year with a product like WD40 or other quality lubricant. This is especially important when the temperature decreases, as the bearing can become stiff. Periodically clean the drawer fronts, drawer trim, and other surfaces with mild detergent and water. Auto wax will preserve the storage unit’s luster finish. Apply the wax as you would to a car. The wax will also help protect the unit against scratches.
NOTES Page 9
16" Side Locker LIMITED LIFETIME WARRANTY MASTERFORCE® Tool Cabinets and Chests have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2017 Menard, Inc.
