Owner`s manual

10
ALWAYS check the tool for damaged parts. Before further use of the
tool, a guard or other part that is damaged should be carefully checked
to determine if it will operate properly and perform its intended function.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. A guard or other
part that is damaged should be properly repaired or replaced by qualified
person.
INSPECT and remove all nails from lumber before sawing.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to
instruct others who may use this tool. If someone borrows this tool, make
sure they have these instructions also.
CARTON CONTENTS/LOOSE PARTS LIST (Fig.1)
Fig. 1
Hold down clamp
Dust bag
Blade wrench (Allen key)
Hose adapter
Saw with 60T blade