Owner`s manual

DESCRIPTION

KNOW YOUR MITER SAW (Fig. 1a)

NOTE: Before attempting to use your saw, familiarize yourself with all of the

operating features and safety requirements.

Your miter saw has a precision-built electric motor and it should only be

connected to a 120-volt, 60-Hz AC ONLY power supply (normal household

current). DO NOT operate on direct current (DC). The large voltage drop

would cause a loss of power and the motor would overheat. If the saw does

not operate when plugged into correct 120-volt, 60-Hz AC ONLY outlet, check

the power supply.

Fig. 1a

Brushes

Dust Bag

Head Assembly

Locking Pin

Saw Arm/Chop

Pivot

Bevel Angle Scale

Fence Lock-

ing Knob

Extension Table Locking

Knob

Hold Down Clamp

Bevel Angle

Lock Knob

Miter Table Locking

Lever

Detent Locking

Knob

Fence

Throat

Plate

Extension

Table

Work Light

Lower Blade Guard

Work light On/Off

Switch

On/Off Trigger

Switch

Safety Lock-off Button

Motor

Laser On/Off Switch